Self Made UART JIG and Debugging Connector for SGS I9000
Posted May 6, 2011 at 12:00 pm by egzthunder1
As of late, it seems that the engineers among us have begun surfacing as we are seeing an influx of threads regarding very specific topics, particularly in the I9000 section. XDA member UberPinguin shares with us the idea that he had while browsing through some of these threads. Most devices, ever since the Windows Mobile, era will come not only with bootloader and roms on them. There are various levels within the hardware hat can be accessed via specialty pieces of equupments, the likes of which you will likely not encounter in too many places outside of approved cell phone repair shops or electical engineers’ work benches. These extra modes in the hardware will allow you to communicate with parts of the hardware in the logic level and such a thing could have potential impact in things such as brick recovery. Uberpinguin, decided to make a multi purpose UART JIG device, which uses a switch rather than him manually changing resistors and cables around.
This is a very intreresting concept and the dev has been kind enough to show us the parts used as well as the schematic design of his creation. If you know what you are doing and would like to give this a go, please leave some feedback, particularly if you find something intereresting while messing with this.
After reading through some very interesting threads about the UART and JTAG interfaces on the Galaxy S phones, I decided to build my own JIG to trigger the various modes available.
However, I didn’t want to mess with splicing different resistors in, and I don’t like having lots of wires hanging about. So I decided to come up with a way to choose the mode by a switch, rather than switching out different cables or using breadboards.
The resulting design is:
You can find more information in the original thread.
Want something published in the Portal? Contact any News Writer.
Thanks pulser_g2 for the tip!
Want something on the XDA Portal? Send us a tip!