OPPO Reno4 and Reno4 Pro are upcoming upper mid-range smartphones with the Snapdragon 765G and 65W SuperVOOC 2.0 charging

OPPO Reno4 and Reno4 Pro are upcoming upper mid-range smartphones with the Snapdragon 765G and 65W SuperVOOC 2.0 charging

We may earn a commission for purchases made using our links.

Towards the end of last year, OPPO launched the Reno3 and Reno3 Pro in China. The mid-range devices feature MediaTek’s Dimensity 1000L SoC and Qualcomm’s Snapdragon 765G SoC, however, the international variants that were launched earlier this year packed in completely different hardware. Instead of the Dimensity 1000L chip, the OPPO Reno3 (global) featured MediaTek’s Helio P90 chipset and, on the other hand, the OPPO Reno3 Pro (global) featured the Helio P95. The company then launched the Chinese variants of the Reno3 series as the Find X2 Lite and Find X2 Neo globally. Now that the company has finally released the OPPO Reno3 series internationally, it’s gearing up for the launch of the Reno4 and Reno4 Pro.

The company has already started teasing the upcoming OPPO Reno4 series over on Weibo and has published shop listings for the Reno4 series on Chinese eCommerce platform JD.com. The teaser video and images shared on Weibo reveal everything there is to the Reno4’s design, which looks a lot like its predecessor except for the new camera module.

The camera module falls in line with a previously leaked image of the device and looks like a lot like the camera design we recently saw on the LG Velvet. The JD.com listings also confirm that OPPO will be launching two different variants of the Reno4, alongside the Reno4 Pro, both of which feature the same triple camera setup on the back and a single hole-punch cutout for the selfie camera over on the front.

The OPPO Reno4 series has also been spotted on Chinese certification authority TENAA’s website, further confirming that the company will be launching three devices as part of the series. The devices, which go by the model numbers PDPT00, PDNM00, and PDNT00, will feature unnamed octa-core SoCs clocked at 2.4GHz, up to 12GB of RAM, and up to 256GB of storage.

The listing further reveals that the Reno4 Pro (PDPT00) will feature a 6.4-inch FHD+ AMOLED display, a 48MP primary camera, an 8MP secondary camera, and a 2MP tertiary camera on the back, with a 32MP selfie shooter, coupled with a 2MP secondary camera over on the front. Powering the device is a 4,000mAh battery which has been divided into two cells (1,965mAh each) to support OPPO’s 65W SuperVOOC 2.0 fast charge technology.

The two Reno4 variants (PDNM00 and PDNT00), on the other hand, will feature a 6.5-inch FHD+ AMOLED display, a 48MP primary camera, a 12MP secondary camera, and a 13MP tertiary camera on the back, with a single 32MP selfie shooter over on the front. Both these devices will also feature a 4,000mAh battery which has also been divided into two cells (1,955mAh each) to support OPPO’s 65W SuperVOOC 2.0 fast charge technology. However, the listings don’t shed light on the exact difference between these two Reno4 variants.

Along with all the aforementioned information, two tipsters on Weibo have revealed what are, most likely, the remaining specification of the OPPO Reno4 and Reno4 Pro. As per the posts, all three Reno4 models will be powered by Qualcomm’s Snapdragon 765G chipset, with the Reno4 Pro featuring a high refresh rate 90Hz display with a 3D curved glass. As of now, we have no further information from OPPO regarding the Reno4 series launch but we expect the company to make an announcement sometime in the near future.


Source: TENAA (1, 2, 3), Weibo (1, 2, 3, 4), JD.com (1, 2)